Menu

Product Care and Cleaning Instructions

All Metal and Powder-Coated Finishes
Clean the fitting using a non-abrasive lint free cloth. Do not use liquid chemical or abrasive cleaner. It is recommended that the fitting is not installed in areas that are liable to reach an ambient temperature in excess of 35 degrees celsius.

All Brass, Copper and Antique Silver Finishes
Brass and copper bases are lacquered to prevent tarnishing; therefore, using a brass cleaner is not necessary. To maintain the finish, use a clean, soft cloth to wipe your lamp.

The Finishes & Options tab on each product page will contain further advice as to where a particular fitting should be installed.

Note that polished brass, satin brass, copper and antique silver finishes should typically only be installed in indoor locations.

Back to the top